How Do Anti-lock Brakes Work?

Automobiles

If you ever find yourself in a situation on the road where you need to come to an abrupt stop, you will be quite thankful for your vehicle’s anti-lock brake technology. This brake design empowers drivers to quickly apply the brakes without the wheels locking up. If modern-day vehicles did not have anti-lock brakes, the wheels would lock amidst a hard brake, and vehicle steering control would be lost. Though most people are aware that today’s vehicles have anti-lock brake technology, there is a general lack of understanding about how, exactly, this technology works.

An anti-lock braking system (ABS) is a safety anti-skid braking system used on aircraft and on land vehicles, such as cars, motorcycles, trucks, and buses. ABS operates by preventing the wheels from locking up during braking, thereby maintaining tractive contact with the road surface and allowing the driver to maintain more control over the vehicle.

ABS is an automated system that uses the principles of threshold braking and cadence braking, techniques which were once practiced by skillful drivers before ABS was widespread. ABS operates at a much faster rate and more effectively than most drivers could manage. Although ABS generally offers improved vehicle control and decreases stopping distances on dry and some slippery surfaces, on loose gravel or snow-covered surfaces ABS may significantly increase braking distance, while still improving steering control. Since ABS was introduced in production vehicles, such systems have become increasingly sophisticated and effective. Modern versions may not only prevent wheel lock under braking, but may also alter the front-to-rear brake bias. This latter function, depending on its specific capabilities and implementation, is known variously as electronic brakeforce distribution, traction control system, emergency brake assist, or electronic stability control (ESC).

There are many different variations and control algorithms for use in ABS. One of the simpler systems works as follows:

  1. The controller monitors the speed sensors at all times. It is looking for decelerations in the wheel that are out of the ordinary. Right before a wheel locks up, it will experience a rapid deceleration. If left unchecked, the wheel would stop much more quickly than any car could. It might take a car five seconds to stop from 60 mph (96.6 km/h) under ideal conditions, but a wheel that locks up could stop spinning in less than a second.
  2. The ABS controller knows that such a rapid deceleration of the car is impossible (and in actuality the rapid deceleration means the wheel is about to slip), so it reduces the pressure to that brake until it sees an acceleration, then it increases the pressure until it sees the deceleration again. It can do this very quickly, before the wheel can actually significantly change speed. The result is that the wheel slows down at the same rate as the car, with the brakes keeping the wheels very near the point at which they will start to lock up. This gives the system maximum braking power.
  3. This replaces the need to manually pump the brakes while driving on a slippery or a low traction surface, allowing to steer even in most emergency braking conditions.
  4. When the ABS is in operation the driver will feel a pulsing in the brake pedal; this comes from the rapid opening and closing of the valves. This pulsing also tells the driver that the ABS has been triggered.

– https://en.wikipedia.org/wiki/Anti-lock_braking_system

Below, we explain how anti-lock brakes function to prevent potentially deadly accidents on the road.

THE BASICS OF ANTI-LOCK BRAKING SYSTEMS
Nearly every single vehicle on the road has anti-lock brakes controlled by a microprocessor. This technology makes it possible to reapply the brakes over and over again, all the way up to 25 times per second in order to prevent the vehicle from skidding. Instead of pumping the brakes in a repeated fashion, anti-lock braking systems do the work for the driver in a much more efficient manner. All the driver has to do is press the brakes and the anti-lock braking technology will do the rest of the work.

This braking technology is centered on the application of cadence braking that determines when wheels are poised to lock. The brake is released at the wheel and subsequently reapplied. All in all, this braking system has three distinct parts: one that determines when the wheel is set to lock, one that releases the brake, and another that restores pressure to the brake line upon release. This technology makes it possible to stop the vehicle without the driver constantly relinquishing and subsequently reapplying pressure to the brake pedal.

MEASURING WHEEL SPEED EVERY SINGLE SECOND
Anti-lock brakes determine when wheels are on the verge of locking in several ways. Wheel speed can be compared to gauge which one is set to lock up. Furthermore, the rate of the slowdown is also measurable. The hydraulic pressure applied to the brake can be released in both situations if the deceleration is significant. Anti-lock brake technology has advanced to the point that computerized electronic systems speed-check the four wheels against one another. This technology also conducts a double-check through monitoring the rate of deceleration as well. Other anti-lock brake systems rely on mechanical sensors to determine when wheels slow faster than they should.

ADDITIONAL COMPONENTS OF ANTI-LOCK BRAKING SYSTEMS
Anti-lock brakes are also dependent on valves to regulate air pressure directed to the brakes as braking occurs. Valves are positioned within the brake lines. The brake valve is open in the initial position, ensuring pressure can move from the master cylinder to the brakes. The brake valve in the second position stays closed while pressure from the master cylinder is prevented from reaching the brakes. The valves’ third position releases some pressure along with the brakes until the vehicle reaches a stop.

Anti-lock brakes are also dependent on a hydraulic control unit that provides signals from the electronic control unit so the brakes can be released. The electronic control unit is best described as an electronic device that receives, enhances, and filters sensor signals to determine wheel rotation speed as well as acceleration. This device receives signals from sensors within a circuit in order to control brake pressure in accordance with data analysis. Hydraulic pressure is increased to control the brakes after signals are transmitted by the hydraulic control unit.

Brake System University is a micro site giving advice, reviews, and technical information on various brake system components like brake lines, brake line repair, and ABS sensors. Brake System University connects you to high quality, genuine brake system replacement parts including replacement brake lines, replacement ABS sensors, replacement brake line repair kit that have been tested and reviewed by experts. If you want to replace any component of your brake system, then this site(https://brakesystems.autopartsu.com/) will helps you in choosing the right component. Brake System University connects you to trusted reviews and referrals to help you easily make a purchase decision.

Article Source: https://www.123articleonline.com/articles/1192563/how-do-anti-lock-brakes-work

Leave a Reply

Your email address will not be published. Required fields are marked *